Cold Air Intake – A Performance Upgrade You Can Do Yourself

How to Make the Engine More Responsive

On foreign cars, the air intake is different from what can be found in domestic cars. For example, in some models, the air intake comes from the engine compartment, while in foreign cars it comes from the radiator grill. May it be worth changing the intake system? And if it is worth doing, what will it give, if there is any sense in it? If you have been driving in hot weather for a long time, you may have noticed that after the car has stood still, it starts to accelerate slowly, and the power of the car resumes only after some time.

The reason is that the engine gets too hot and the temperature is enough for the thermostat, but not yet enough for the fan to work. The ignition is automatically reset so as not to have a detonation. When the car starts to move, the radiator is cooled by the oncoming airflow, the thermostat is activated, and the inrush of the power unit returns. But if you are looking for the Best Cold Air Intake for Nissan Titan, then I suggest you go to the link https://gmbbodyforum.com/best-cold-air-intake-for-nissan-titan/ where you will find a complete review of all air intake models for your car. Moreover, you will know all the pros and cons of the models as well as their real price and usage rules. So rather go to the site and choose the best air intake.

Instructions

1. Let’s look at how you can do cold air intake, using two different options: with the help of aluminum corrugation and plastic pipe. So, the first option is a corrugated aluminum tube. First, it must be purchased for this we go to a construction store or, without leaving home, order the necessary element in the online store of auto parts. Diameter of the bellows is 80 mm. When the part is already available, from the box of the filter take out the standard funnel with a piece of corrugated tape, and then wrap it with insulating tape. The insulating tape will still be needed in order to be able to wind the clamps. At the bottom of the bellows connect and clamp it to the bumper bracket. The element’s nozzle is directed downwards, and the second clamp connects the corrugation to the tow ring.

Put the filter on top, put the corrugator at the bottom. In the lower part of the element, you must make a hole so that the moisture can flow out of the corrugated material freely. As a result, we should have a construction that looks like a trunk and has the shape of a snail. This method of air intake has already been tested by thousands of car owners, so we will not argue about the reliability of the construction.

2. The second way is to put plastic pipes with a diameter of 75 mm. With this diameter, the pipe will perfectly enter the box of the air filter in its hole. First of all, we remove this box and lay wiring under it. To make the angle of the line is even, use an industrial hairdryer, warming up the plastic with it. When you will be finishing, it will be better if you remove the protection of a crankcase, and then some elements are much easier to access. On the crossbar put a pipe that should touch the fan mounts.

To the beam and pipes, which coolant enters the radiator, attach a plastic pipe. Above the radiator there is an air intake nozzle, it must be fixed. After that, we put the filter box in its usual place and do not forget to make holes in the new line from below so that water could also drain freely.

Cold air, unlike hot air, has a higher percentage of oxygen. As a result, fuel should be consumed more efficiently and economically. Certainly, you should not expect from such improvement too high results, but you will be sure at once that it will positively influence the work of the engine. If you decide to install a turbocharger on your car, you will anyway have to seriously think about changing the air intake system.

How the Cold Air Intake System Increases Engine Performance

The cold air intake system, is one way to increase engine performance. When the engine runs, it draws in air (oxygen), mixes it with fuel, and burns the resulting mixture to produce energy. It’s one of the main components of internal combustion engines.

And if, you increase the amount of air or the amount of fuel – going into the engine, you can increase the power output. But increasing the amount of fuel is a simple task, but increasing the airflow into the engine is much more difficult. That’s when the cold air system comes into play. The cold air system increases airflow by lowering the temperature of the incoming air supply to the engine. Why is this important?

When the air gets colder, it gets denser. And that means you get more oxygen in less volume. More oxygen means more energy. Another aspect of the cold air intake system, is to reduce airflow resistance. This system has a zero-resistance air filter, and its air intakes are carefully polished to reduce resistance to airflow. This reduces unwanted turbulence in the lines. There are many ways to increase the amount of air in the engine. And this category includes turbochargers, turbochargers (more about them here ), and cold-air intakes. But, cold air intakes, are the cheapest and easiest to install, out of the three options suggested above. The cold air intake system, does not cause an increase in fuel consumption. So, it’s a cheap alternative when you don’t have the time or money to make the serious investment in engine modifications needed for other systems.

That’s It!

In the end, I hope that this article was useful for you and you understood how you can improve the air intake in your car quickly and easily. But if you are interested in this topic and want to learn even more information, you can look more here. In this forum, you have the opportunity to learn all the answers to your questions as well as ask your own questions. You will also see all the instructions on how to install and use the air intakes.